User Manual

Please ensure that your T27 is no less than 50% charged.

If it is below 50%, you may not be able to jumpstart your

vehicle.

1. Connect the jumper lead to your T27.

2. Connect the +(red clip) to the + on your car battery.

3. Connect the -(black clip) to the - on your car battery.

4. Turn your key to start your vehicle.

5. Once your vehicle is started, disconnect the alligator clip as soon as

possible.

Note:

1. After starting your vehicle, Remove the T27 as soon as possible.

2. DO NOT connect the 2 alligator clip together.

3. DO NOT disassemble the T27.

Starting Your Vehicle: