User Manual

If the following operations are unable to troubleshoot, please stop using the
jump starter and contact with the stores which you bought the jump starter
from
1. After starting the vehicle, for safety, please remove the device ASAP.
2. For safety, please do not connect the two clamps directly when they are
connected to the device and the device is tuned on.
3. For safety, please do not dismantle the device.
4. Please do not dismantle the device, otherwise no warranty.
Trouble Cause Solution
Trouble Shooting:
Warning:
Do not use the product in bathroom or other damp places or places
near the water.
Do not remodel or dismantle the device.
Keep the product away from the children.
Do not reverse the connections of output or input.
Do not throw the product into fire.
Please don’t use the charger whose charging voltage is more than the
product to charge.
The temperature should be kept between 0°C to 40°C when the device
is being charged.
Do not hit or throw the product.
If there is problem with charging, please contact your dealer.
Keep the product away from the flammable objects (Bed or carpet)
If the liquid of the device is splashed into eyes, do not wipe the eyes
but wash them with clean water immediately.
If the product is heating and discolouring, please stop using, as it may
lead to liquid, smoke and burn.
After long term storage or not in use, please ensure that devices will
be charged and discharged in every three months.
The power capacity
of the device is
shown in 100%, but
did not fully charged
in charging process
Pull out the charge
plug, then reinsert.
The indicator light of the device
indicates four lights on means
stop charging, and this situation
means it is semi-state of charge,
which is conducive to long-term
storage when the device is not
in use for long time.
Low voltage protection of the
device is started and the device
can not be turned on.
Nothing happens
when pressing the
switch button
Insert the charger
plug into the12V2A
input port to activate.
7