User Manual

2.4 USB Simulator Mode
The system may be used as a HID controller when connected to a computer via USB. When connected
to a computer the function is activated automatically and will be recognized by windows as a game
controller.
To calibrate or test the system in windows:
• 1. Type "RUN" into the search bar and select the program.
• 2. Type "joy.exe" into the "Open:" box and press enter.
• 3. Select the system and open properties within the game controller menu.
• any changes made to trims within the system will take effect in the USB mode. If the system is
not responding as expected, reset to factory settings in the system menu.
7
Note:
3. Getting Started
Before operation, install the battery and connect the system as instructed below.
3.1 Transmitter Battery
Danger · Only use specified battery.
Danger · Do not open, disassemble, or attempt to repair the battery.
Danger · Do not crush/puncture the battery, or short the external contacts.
Danger · Do not expose to excessive heat or liquids.
Danger · Do not drop the battery or expose to strong shocks or vibrations.
Danger · Always store the battery in a cool, dry place.
Danger · Do not use the battery if damaged.
The transmitter has an internal battery, to charge connect the system to a suitable USB charger or
computer.