User Manual
9
5. Home Screen
The home screen diplays useful information about your model, including timers and TX/RX status.
Start Page
Main Menu
Timers + Timer Menu
TX/RX Baery Status +
Baery Setup Menu
Display Servos
The system's navigation is designed to be easy and quick.
• To change home screen page, use your finger to swipe from left to right to view the the channels
screen.
• To enter the main menu, press the
icon. Then use your finger to swipe up or down on the screen
to scroll.
• To enter a function, touch its name.
• To navigate function menu, swipe up or down to scroll and press an item on the list to enter it.
• To go back to a previous menu, press the
icon.
Press and hold the screen to preform
a servo test.
Note: Make sure that the the engines are
turned off/disconected during this test.
Failure to do so could lead to harm to
yourself or others.
5.1 Timers
To enter the timer function touch T1/T2 on the main screen. The system has 2 timers available, both can
be assigned to a switch and have 3 different settings.
Setup:
1. Select a mode.
Modes:
• Up: The up timer starts from zero and counts up.
• Down: The down timer starts from a pre selected time and counts down.
• D/U(Down then up): The D/U timer starts from the set time, and counts down to 0, then counts
back up.
2. If nessesary set up the pre defined time by selecting the "Setup" option. Select the correct decimal
and use the onscreen arrow keys to change the value.