User Manual

Discharge

•The discharge parameter should be set according to the rest of battery capacity or

decreased battery voltage. When discharging, it should be pay more attention to the

discharge process. It must set the correct discharge voltage, in order to avoid the over

discharging. Li-xx battery cannot lower than the lowest voltage, because it is easy to

damage the battery. Normally, it do not need to discharge for the Li-xx battery.

• Some batteries have memory function. If the capacity is partly used, they will remember it

and use that part of capacity only next time. This is called memory function. NiCd /NiMH

batteries also have memory function, but they prefer fully charged and then completely

used. NiMH battery's memory function is inferior when compared with NiCd battery.

• The Lithium battery prefers a partial rather than a full discharge. Frequent full discharge

should be avoided if possible. Instead, charge the battery more often or keep a normal

input power

•It should finish 3-5times circle charging and discharging for the new NiCd battery pack. In

this way, the capacity of this battery pack will be to the best status.

The above warnings and safety notes are particularly important. Please follow the

instructions for a maximum safety, otherwise the charger and battery can be badly

damaged. Also it can cause a fire, lead to human injury or property loss.