User Manual

10、Cell meter test
-
16
-
This charger also can be used as a cell meter. It can
show the average voltage and the highest/lowest
voltage of each cells.
Choose the cell meter program interface, press Start to
see the individual 1-6cell’s voltage.
Press Start to show the highest/lowest voltage of the
single cell and the voltage of each cell.
11、IR test program
It will know the performance of the battery from the IR
value. The value of the IR which tested by this charger
is the relative value (it is not the absolute value). If you
want to compare with several more batteries, it is better
test in the same voltage. If the test data is close, then
the performance of the battery is better.
Choose the IR test program, press Start to enter to
show 1-6battery’s IR.
Press Start to show the highest/lowest IR of the single
cell and the total IR of the battery pack.
BATT/PROGRAM
BATT METER
BATT/PROGRAM
BATT RESISTANCE
4.16 4.18 4.17 V
4.18 4.16 4.17 V
010 002 002 mΩ
003 004 003 mΩ
TOTAL: 24mΩ
H: 10mΩ L: 2mΩ
MAIN 25.01V
H4.178V L4.155V
Start
Enter
Batt type
Stop
STATUS
-
+
Start
Enter
Batt type
Stop
STATUS
- +