User Manual

8.3 Charge-to-discharge & discharge-to-charge cycle NiMH/NiCd battery

8.4 NiMH RE-PEAK

Set the sequence on the left and the number of cycle

on the right. You can use this function for balancing,

refreshing and break-in the battery. To avoid rising

temperture of the battery, there will a brief cool-off

period that already fixed at 'User setting' after each

charge and discharge process. The cycling number

ranges from 1 to 5.

To stop the process, press Batt type/Stop key once.

You can change the discharge or charge current by

pressing Start/Enter key once during the process. The

audible sound indicates you the end of process.

At the end of the process, you can see charged or

discharged electric capacities of the battery at each

cyclic process.

By pressing INC or DEC button, the screen shows the

result of each cycle in order.

NiMH RE-PEAK

NiMH 2.0A 7.42V

RPC 022:45 00890

The charger has the new program which can charge

the battery for second time. (The battery which do not

using for a long time or the old battery or the battery

which can not arrive the Max voltage after the first

charge). In this way, this mode can make the battery’s

capacity to the standard value and make the battery’s

life for longer time.

Long press Enter key into charging program, the

charging current is the defaulted previous NIMH

battery charging current, and press STOP key back.

(1-3)