User Manual

Various information during the process
You can inquire various information on LCD screen during charging or
discharging process. When you press DEC button the charger shows the
establishment of user settings. And also you can monitor the voltage of
individual cell by pressing INC button when the individual connection cable
is linked to the Lithium battery being processed.
The final voltage will be reached at the end of
process.
The 3-pin port is assigned as an USB port.
The external temperature only will be
displayed when using the thermal probe.
The present voltage of input DC power.
Using the individual connection cable to the
battery, you can check the individual voltage of
each cell in the battery pack. When connect
the cable to the port on the right side of the
charger the program shows the voltage of
each cells for maximum 6 cells in sequence. To
utilise this feature, the battery pack must have
output connector that linked to each cells.