User Manual

battery type you set up. The example shows
the battery pack of NiMH, 12cells and
3000mAh of capacity.
Set up the charge current for manual charge
mode, or the current limit for automatic charge
mode. Each mode can be switched by
pressing INC and DEC button at the same time
when the current field is blinking.
Setting up discharge current and final voltage.
Setting up the sequence of charge and
discharge, and the cycling number.
Saving the data.
Load Data Program
This program calls back the data that was stored at “Save Data’program.
To load the data, press Start /Enter key once to blink the data number field
and select the number using INC or DEC key then press Start /Enter key for
more than 3 seconds.
Select the data number to be called back.
The data matched with the number will be
displayed at this time.
Loading the data.