User Manual

In the MIXER screen (page 5/13) you see a summary of the mixes for each output channel. The
list down the left shows the numbers of the channels into which you plug the servo leads.
Let's enter an aileron-to-rudder to mix for our Piper Cub. Move the cursor down to highlight RUD.
Press Menu. A pop-up screen appears:
Select INSERT and press MENU. This adds an extra line for the Rudder servo channel that allows
it to be controlled by the Aileron stick.
When we move the aileron stick we want the rudder to move in the same direction, but only by a
small amount, say 20%. Here's the screen that shows the extra mix that is added to the Rudder
servo channel:
And here's how the mixer screen looks when we have inserted those values into the Edit screen:
First Steps with Ersky9X – Version 1 9 of 13