User Manual

Further Information
For additional information to help you understand and make best use of your Turnigy 9XR Pro, see
the other manuals in this series and/or go to one of the forums dedicated to this transmitter and the
open source firmware it uses.
9XR Pro Manuals
The following manuals are designed to help you get the most out of your Turnigy 9XR Pro. They
are available at: http://openrcforums.com/forum/viewforum.php?f=7
1. 9XR Pro: Introduction to the Hardware
2. 9XR Pro: First Steps with Ersky9x
3. 9XR Pro: Ersky9x Explained
4. 9XR Pro: Communicating with a Computer
5. 9XR Pro: Using Voice with Ersky9x
6. 9XR Pro: Using the Eepskye Program
7. 9XR Pro: Glossary of Terms
Internet Forums
Help is always just a few clicks away on the internet forums where experienced Ersky9x users
volunteer their knowledge and experience. Many of these people have been developing the
firmware for years without remuneration; all they ask is donations to fund further development.
Open RC Forums: http://openrcforums.com/forum/index.php
Ersky9x index page: http://openrcforums.com/forum/
9XR index page: http://openrcforums.com/forum/viewforum.php?f=70
NOTICE
Ersky9x and Eepskye are free open source software, independently developed. This manual is
provided to help you understand and use them specifically for the Turnigy 9XR Pro transmitter,
though much of the information also applies to the Sky replacement boards produced as an
upgrade for the 9x transmitter.
You can redistribute the software and/or modify it under the terms of the GNU General Public
License version 2 as published by the Free Software Foundation. You can also freely quote from,
redistribute and/or modify this manual; in doing so please acknowledge the source and any
changes.
The program and the manuals are distributed in the hope that they will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE. See the GNU General Public License for more details. In using them,
you agree that you accept all responsibility.
For more information go to: http://openrcforums.com/forum/viewforum.php?f=7
9XR Pro First Steps with Ersky9x 2014-04-25
First Steps with Ersky9X – Version 1 13 of 13