T6A-V2 Instruction Manual

2. 4G 6 Channel remote system
14
Model: T6A-V2
Notes
Left click the 'DR' button on the interface, the screen on the right will
appear, this function is use for Double ratio control of CH1\CH2\CH4
channel. It gives you the best control of the model. This function offer
the great help to beginner.
CH1\CH2\CH4 are allowed to adjust Individual, Adjusted value from
0% to 100%. Number can be directly entered from the keyboard.
This function will only take effect when the 'DR' button is switch on.
Click 'ok' button to finish the adjustment.
Left click the 'STICK SETTING’ button on the interface, the screen
on the right will appear, this function is use for control mode
adjustment according to different customer's habit, this system offer
four different mode to choose.
Click 'ok' button to finish the adjustment.
Left click the 'THRO CUV' button on the interface, the screen on the
right will appear, this function is use for the adjustment of engine
throttle curve to make it more suitable to the model and Play a better
performance, and also improve the yarage of model.
It make up of two parts: normal state(NOR) and Stunt state(IDEL).
Each state of the curve are make up by five point, each point can be
setup Individually, Adjusted value from 0% to 100%, Number can be
directly entered from the keyboard.
Click 'ok' button to finish the adjustment.
Left click the 'PITH CUV' button on the interface, the screen on the
right will appear, this function is use for the adjustment of the
helicopter PIT, it improves model control and also the yarage of
model.
It make up of two parts: normal state(NOR) and Stunt state(IDEL).
Each state of the curve are make up by five point, each point can be
setup Individually, Adjusted value from 0% to 100%, Number can be
directly entered from the keyboard.
Click 'ok' button to finish the adjustment.
Left click the 'TYPE’ button on the interface, the screen on the right
will appear, this function is use for the model selection.
This system offers four model to select: ACRO, HELI-90. HELI-120,
HEli-140.
Click 'ok' button to finish the adjustment.