T6A-V2 Instruction Manual

2. 4G 6 Channel remote system
10
Model: T6A-V2
Notes
1. Install the battery to the transmitter and switch on the power.
2. Plug in the programming line to the transmitter port.
3. Plug in the other head of programming line to computer.
4. Launch the software program T6CONFIG.EXE.
5. Click on setting button, select programming lone port.
6. Click on GETUSER button, import the transmitter data to pc.
7. Apply programmable settings on the existing parameters.
11. Computer hardware connection steps
When you buy the T6A-V2 series remote sys
tem with programming line, you can
set up the program by yourself. You will need to follow these steps when you
process the program set up.