User Manual

· Updating the firmware of the ESC
-
Click the ‘update’ menu (the Shortcuts button )
- Click the ‘Get ESC’s Ver’ button, which will display current version number.
- Click the ‘Open’ button to achieve the upgradeable software*, which can be downloaded from
Internet.
- Click the ‘Start’ button to upgrade the firmware of ESC to new version.
Firmware upgrade will be finished in 3-5 seconds.
·
Reading the flight data from the ESC-100A
-
Make sure to input the correct parameters in the area of ‘User Parameter’: Gear Rate and Magnet Poles
number of motor, it is very important to read right motor RPM information.
- Click the ‘upload record data’ button to upload the flight data from the controller, the green LED of ESC
will flash.
- After clicking the ‘upload record data’ button, the flight data in ESC will be shown as curves in the display
window.
TURNIGY ESC-100A MANUALS
8 page / 14 pages