User Manual

For high voltage ESC (supports 5-12 cells Lipo), the default value is !°Auto-
F3A!±;Please note that !°Auto-F3A!± option is only suitable for big motors
of large scale airplanes such as F3A, please don't use this option for big
motors of helicopters.) When you accelerate the motor immediately, if the
motor suddenly stop running and emit scream sound,please try to set this
item to other value.
Item 12. Lipo Cells:
For normal voltage ESC (supports 2-6 cells Lipo), *Auto / 2S / 3S / 4S / 5S / 6S,
Value 1 is Auto
Value 2 is 2S
Value 3 is 3S
Value 4 is 4S
Value 5 is 5S
Value 6 is 6S
Default is Auto
±Note4 For high voltage ESC (supports 5 to 12 cells Lipo), *Auto / 5S / 6S / 8S / I0S / 12S,
the default isAuto!
:If you choose "Auto",the ESC may mistakenly judge the battery cells when the voltage is
ess than 3.7V/Cell,so we strongly suggest setting the"Lipo Cells"manually.
±Note5 This programmable item is available for lithium battery.In the startup process,the
motor will emits several"Beep-"tones to represent the lipo cells number,it is helpful for you
to check whether it is coincident with the actual battery pack or not. Note5.
For high voltage ESC(supports 5to 12 cells Mpe),when the motor emits the "Beep'tone to
represents the cells number,a long"Beep-"tone.So 5S="Beep-",6S="Beep-Beep"(l long 1
short),8S="Beep-Beep-Beep-Beep-"(l long 3 short), 10S="Beep-Beep-"(2 long),12S=Beep-
Beep-Beep-Beep-"(2 long 2 short).
While for normal voltage ESC
(supports 2 to 6 cells Lipo),we still use 5 short "Beep-"tones to represent 5S lipo,and 6
short"Beep-"tones to represent 6S lipo.