User Manual
TURNIGY Manual for Brushless Motor
Sp,ed
Controller
._II."I_lllIt:.II:J~
1.
"beep" brake
(1
short
tone)
2. "beep-beep-" battery type
(2 short tone)
~I:
"beep-beep-beep-"
cutoff
mode (3 short tone)
"beep-beep-beep-beep-" cutoff threshold (4 short tone)
5.
"beep-----"
startup mode
(1 long tone)
6.
"beep-----beep-"
timing
(1 long 1 short)
7.
"beep-----beep-beep-"
set all to default (1 long 2 short)
8.
"beep-----beep-----
exit
(2
long
tone)
1. Enter program mode
2. Select programmable items
3. Set item value (Programmable value)
4. Exit program mode
1. Enter program mode
1) Switch on transmitter, move throttle stick to top
position, connect the battery pack to ESC
2) Wait for 2 seconds, the motor should emit
special tone like "beep-beep-"
3) Wait for another 5 seconds, special tone like
"
jl5671i"
should be emitted, which means
program mode is entered
@
2. Select programmable items:
After entering program mode, you can hear 8 tones in a loop in the
following sequence. If you move the throttle stick to bottom within 3
seconds after one kind of tones, then this item will be selected.
Remark: 1 long
"beep·····"
= 5
short
"beep-"
3. Set item value (Programmable value):
You will hear several tones in loop. Set the value matching to a tone by moving throttle stick
to top when you hear the tone, then a special tone
"isis" emits, means the value is set and
saved. (Keeping the throttle stick at top position, you will go back to step 2 and select other
items; Moving the stick to bottom within 2 seconds, you will exit the
proqrarn mode directly)
~
"bsep-"
"beep·beep·"
14beep-6eep-beep"
Items
1
short
tone
2
short
tones 3 short tones
Brake
Off
On
---------------
Battery type
Li-ion / Li-poly
NiMh / Nicd
------------
Cutoff
mode
Reduce power Shut down
------------
Cutoff
threshold Low
Medium High
Startup rnode
Normal
Soft Super soft
Timing
Low
Medium
High
@
4. Exit program mode
There are 2 ways to exit
program mode:
1. In step 3, after special
tone
"isis",
move
throttle stick to bottom
within 2 seconds.
2. In step 2, after tone
"beep-----beep-----"(ie.
The item #8), move
throttle stick to bottom
within 3 seconds.
-4-