Preliminary Preliminary Preliminary Preliminary Installation and Operation Manual for the IPC-2, Twin stereo level matching interface Copyright 1996 by Broadcast Tools, Inc. All rights reserved. Except as permitted under the United States Copyright Act of 1976, no part of this document may be reproduced or distributed without permission All specifications and features for this product are subject to change without notice.
Broadcast Tools, Inc. IPC-2, Twin stereo level matching interface TABLE OF CONTENT Sections Page Number Introduction 3 Safety Information 3 Who to contact for help 3 Warranty 4 Equipment Specifications 5 Product Description 6 Installation 6-7 Component Layout 8 Installation and Operation Manual Broadcast Tools, Inc.
Broadcast Tools, Inc. IPC-2, Twin stereo level matching interface INTRODUCTION Thank you for your purchase of a Broadcast Tools, Inc., IPC-2, Twin stereo level matching interface. We’re confident this product will give you many years of dependable service. This manual is intended to give you all the information needed to install and operate the unit. NOTE: This manual should be read thoroughly before installation and operation.
Broadcast Tools, Inc. IPC-2, Twin stereo level matching interface BROADCAST TOOLS, INC. LIMITED WARRANTY AND REMEDIES LIMITED WARRANTY The term “Buyer” as used in this document refers to and includes both (but only) (a) any person or entity who acquires such an item for the purpose of resale to others (i.e., a dealer or distributor of an item), and (b) the first person or entity who acquires such an item for such person’s or entity’s own use.
Broadcast Tools, Inc. IPC-2, Twin stereo level matching interface SPECIFICATIONS IHF Input Level -10dBv Nom, @ 23K Ω, Hi Gain –20dBv @ 10K Ω Gain 6 to 30db Professional output level +4dBu nom, + 24dBu max, @ 600 Ω, Active balanced Frequency Response DC to 20kHz, +/- 0.25dB Noise 87dB below nom, output THD .007% any frequency IMD (250/7kHz) .009% Interfacing IHF Inputs – Gold Phono Jacks (RCA) Professional Outputs – Removable screw terminals Power Requirement 16.
Broadcast Tools, Inc. IPC-2, Twin stereo level matching interface PRODUCT DESCRIPTION The IPC-2 is a twin active IHF to professional stereo level-matching interface. The IPC-2 is designed to interface twin IHF consumer (-10dBv or –20dBv) products with professional (+4/+8dBu) audio equipment. The IPC-2 is equipped with twin stereo output level controls.
Broadcast Tools, Inc. IPC-2, Twin stereo level matching interface INSTALLATION, cont. STEP 1: INSPECTION Please examine your IPC-2 carefully for any damage that may have been sustained during shipping. If any is noted, please notify the shipper immediately. Retain the packaging for inspection by the shipper. The package should contain the IPC-2, 16.5Vac @ 600ma wall power transformer and this manual. STEP 2: BENCH TEST Place the IPC-2 on a workspace and connect power to the unit.
