Dimensions Guide

POLY-CLASSIC SQUARE ORNAMENTAL CAPITALS
Designed with crisp, true architectural detail, Ornamental Capitals artfully capture natural themes and images. Capitals for square non-
tapered Poly-Classic columns are crafted from poly/resin, and are load bearing and waterproof. Each style is proportionally scaled for
the width of the shaft when the shaft is trimmed at the astragal for easy installation. Since the shafts will need to be trimmed, the over-
all height of the finished column will need to be adjusted by the “Height Adjust” value in the following tables. If an architecturally cor-
rect installation will be required, the shaft should be trimmed at the top fillet for Greek Erectheum, Roman Ionic and Scamozzi capitals,
and the overall height will be further reduced by the height of the neck ring (see shaft specifications for the astragal neck ring height).
EMPIRE WITH NECKING
Column Size Capital Height Abacus Width Scroll Width Height Adjust
6” 7 3/4” 10” 9” + 4 1/8”
8” 10” 13 1/2” 12 1/4” + 5 1/2”
10” 11” 18” 17” + 5 15/16”
12” 14 1/2” 20 1/2” 19 1/2” + 9 3/4”
14” 17” 23” 19 1/2” + 10”
GREEK ANGULAR IONIC
Column Size Capital Height Abacus Width Scroll Width Height Adjust
8” 5 1/8” 14 1/4” 13 3/4” - 3/16”
10” 6” 17 1/4” 17” + 1/8”
12” 7 1/4” 20 3/4” 19 1/4” + 1 3/4”
14” 8 3/8” 20 1/2” 19 1/2” + 3/8”
GREEK ERECTHEUM
Column Size Capital Height Abacus Width Scroll Width Height Adjust
6” 3 3/4” 7 3/4” 11 3/4” - 11/16”
8” 5 1/4” 10 1/2” 15” - 1/16”
10” 6 1/4” 14 1/2” 21” + 3/8”
12” 7” 15” 21” + 2 1/2”
14” 9” 17 1/2” 26” + 1”
GREEK ERECTHEUM WITH NECKING
Column Size Capital Height Abacus Width Scroll Width Height Adjust
6” 5 3/4” 7 3/4” 11 3/4” + 2 1/8”
8” 7 1/2” 10 1/2” 15” + 3”
10” 9 1/2” 14 1/2” 21” + 4 7/16”
12” 11 1/4” 15” 21” + 6 3/4”
14” 13 1/2” 17 1/2” 26” + 6 1/2”
EMPIRE
Column Size Capital Height Abacus Width Scroll Width Height Adjust
8” 5 1/4” 13 1/2” 12 1/4” + 3/8”
10” 6 1/4” 18” 17” + 1 3/4”
12” 7 1/4” 20 1/4” 19 1/2” + 3/4”
14” 8 3/4” 23” 19 1/2” + 1 3/4”