Replacement Part List

26FB
TURF BEAST
Rev: July 2015
TURF BEAST Finish Mower
8
Step 1: Front Wheel Assembly
Note: Some mowers may be shipped with the
front wheels pre-assembled.
A. Remove packaging materials surrounding
the front wheels and remove the bolt
threaded into the front wheel. Retain this
bolt and washer for future use.
B. Unscrew the fastener holding the bolt to the
steel shipping rack. Set the nut and bolt
aside. It will be re-used in the mower
assembly process.
C. Remove the mower from the steel shipping
rack.
D. Slide the front wheel pivot shaft through the
sleeve. If the fit is tight, apply some grease
to the pivot shaft.
E. Secure the shaft in place with the bolt and
hardware that were provided with the
wheel.
F. Repeat steps A through E for the second
front wheel.
G. Apply grease to the front wheel sleeve
grease fittings when complete.
Assembly Instructions