USER WN FYE ELECTRIC FIREPLACE STOVE MODEL HO: SUTURES THIS IMPORTANT LEAF ALL MET RUCTIONS BEFORE USING YOUR ELECTRIC FIREPLACE, FAILURE TO FOLLOW INSTRUCTIONS MAY LEAD TO DAMAGE TO THE MACHINE OR PERSONAL JURY.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Warranty Registration Thank you for purchasing a TURBO Electric Fireplace! We're extremely happy that you have decided to join us. To thank you we're giving you a warranty extension. All you need fo do is register your new product at hitpeffwrarw Once it's registered, you'll get a 1-year extension on the 1-year manufacturer warranty for a total of 2 years.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Safety Instructions % To prevent possible fires, do not bio air intakes or exhausts in any manner. Do not use on soft surfaces, like a bed, where the opening may bs blocked. @ The fireplace has hot, sparking, and arcing pairs Inside. Do not use i In areas where gasoline, paint, or flammable liquids are used or stored. This appliance should not be used as a drying rack for clothing. # Usa this appliance only as described in this manual.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Parts List TTT elite 11107 a Electric Fireplace 1 c Philips-Head Screw 16 5) Remote Control : INSTALLATION WARNINGS # The fireplace is heavy and should be assembled near its desired location. ®t is recommended that two people move the fully-assembled fireplace to prevent injury. & Do not install the unit on shelved, raised platforms, beds, blankets, pillows, sto.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Installation BEFORE ASSEMBLY Open the unit and check carefully for visible damage. If you have any problems with Installation, operation, missing pans, or other damage, please contact the TURBO customer service team. Do not dispose of packaging uni ll you are satisfied with your fireplace.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Control Panel 0 © LCD Screen ©) Indicators © Timer O Heater ON/OFF © Flame Control Main Power # Crass the main power bunion (6) to turn on the fireplace. 4. LCD Serene: Displays information about the settings you are using. 2. indicator Lights: There are 3 indicator lights below the LOD screen -red, green, and blue. a. Red Indicates that the LOD screen is displaying the temperature in digress Fahrenheit. b.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Control Panel Gite eT Button idle Press phe Press dpe 1 22°C 1 72°F 2 23°C 2 73°F 3 24°C 3 74°F 6 rc 1 82°F 62°F s 1e°c 14 63°F 12 21°C . 22 71°F To switch from Fahrenheit to Celsius (or vic versa) press and hold the main power button for § seconds. The LCD screen will flash 5 times to confirm your settings. USING THE FLAME CONTROL Pres the flame control button to cycle through the flame brightness levels.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Control Panel USING THE REMOTE CONTROL The remote control can be used up to 13 fest (4 meters) away from the heater, so jog as there are no constructors between the remote control and the heater. — TT Thermostat Control ©) +—Power Button Remote control Control receiver Timer Setting (ET REMOTE CONTROL BATTERIES Tress and slide the battery cover on the rear of the remote and remove the cover. insert two new AAA 1.5V batteries into the battery compartment.
NAVE THESE INSTRUCTIONS FOR FUTURE UBE FCC/IC Information # Connect the equipment into an outlet on a circuit different from that fo which the receiver is connected. @ Cantu's the dealer or an experienced radio/TV technician for hap. This device complies with Part 16 of the FCC Rules. Operation is subject to the following two conditions: {1}. This device may not cause harmful interference, and {2}. This device must accept any interact received, including interference that may cause undesired operation.
NAVE THESE INSTRUCTIONS FOR FUTURE USE Troubleshooting ap Possible Cause(s) Corrective Action Power light is ON but the flame affect is not visible #The fireplace is not operating correctly. ® Contact customer service. Excessive noise when the fireplace is operating #The fan is defective. @ Contact customer service e The fireplace assembly is defective.
