TURBO WN FYE TV STAND MODEL NO: FIRESIDE FEES IMPORTANT HEAD ALL INSTRUCTIONS BEFORE ASSEMBLING YOUR TY STAND.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Safety INSERTIONS + ore 02 Pr-Assembly PP 02 Tools Required Eee 02 Hardware Included: mmm 03 Parts List: «cur 05 Assembly eee eee ea rarer ere ea ran rear Ernest rein 06 Care and Maintenance «orm 27 Warranty Information: ore 28 01
SAVE THESE INSTRUCTIONS FOR FUTURE USE Please read the following instructions before attempting to assemble, operate, or install this product. Save these instructions for future reference. WARNING: Use only with flat panel TVs and audio/video equipment meeting recommended size and weight limits. Never use it with any larger/heavier than recommended flat panel TVs or equipment.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Pr-Assembly yd Description [e100 Cam Bolt 46 + 1 (extra) Wooden Dowel 48 + 1 (extra) Cam Lock 46 + 1 (extra) Screw Cabinet Magnetic Catch Screw Spacer Screw Door Handle Pivot Hinge-Left Pivot Hinge-Right Long Washer Screw Pulley Joint Bolt Guide Rail Joint AREA CIN ANNA AVIAN © Shelf Support Bracket 20 + 1 (extra) Bolt 40 Anti-tilt Nylon Strip and Metal Ring 2,4 Drywall Anchor Kit 2+2 Washer 2 Protective Sticker 2 Sticker 38 Bolt Screw Screw 18 + 1 (extra) josh > Anti-
SAVE THESE INSTRUCTIONS FOR FUTURE USE Pr-Assembly PARTS LIST 21d Description [TET 13 1 Top Panel 1 2 Top Crossbar 1 3 Removable Shelves 4 4 Fixed Shelf 1 5 Center Crossbar 2 6 Sliding Door Track 1 7 Right Vertical Stretcher 1 8 Left Vertical Stretcher 1 9 Right Inner Panel 1
SAVE THESE INSTRUCTIONS FOR FUTURE USE Description [e100 10 Left Inner Panel 1 1 Right Outer Panel 1 12 Left Outer Panel 1 13 Base Panel 1 14 Lower Rear Panel 2 15 Top Rear Panel 1 16 Right Sliding Door 1 17 Left Sliding Door 1 18 Right Swinging Door 1 19 Left Swinging Door 1 20 Removable Panel 1 21 Center Rear Panel 1 22 Bottom Front Bar 1 23 Bottom Back Bar 1 24 Bottom Left Bar 1 25 Bottom Right Bar 1 26 Bottom Middle Stripe 2 INSTALLATION WARNINGS ®The TV stand Is heavy and should be assembled near Its d
SAVE THESE INSTRUCTIONS FOR FUTURE USE Unpack the unit and confirm that you have all the hardware and parts listed. Assemble the unit on a carpeted floor or the empty box to avoid any scratches. Note: This TV stand uses cam bolts for assembly. During installation, do not fully tighten cam bolts until you finish assembly. This will help make assembly much easier. STEP 1 Insert wooden dowels {B) and cam bolts (A) into the designated holes on the bottom A front bar (22) and the bottom back bar (23).
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 3 Attach the bottom left bar (24) and the bottom right bar (25) to the bottom back bar (23). STEP 4 Attach the bottom middle stripes (26) to the bottom back bar (23).
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 7 Flip the assembled base panel (13). Insert the bolts (AA) into the designated holes on the bottom of the assembled | based panel (13). ) 18 STEP 8 Insert wooden dowels (B) and cam bolts (A) into the designated holes on the base panel{13).
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 9 Attach cabinet magnetic catch (E} to the inner panels (9, 10). STEP 10 0 Attach vertical stretchers inner panels (9 & 10).
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 11 Attach center crossbars (5) to fixed shelf (4) and removable panel (20).
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 12 Connect now-assembled fixed shelf (4) to inner panels (9 & 10). 0 w|> aaa STEP 13 Attach the now-assembled inner panels and shelf to the base panel (13).
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 14 Prepare outer panels (11 & 12) for assembly. STEP 15 Attach the outer panels the base panel (13).
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 16 @ Attach the sliding door track (6) to the top crossbar (2). @ The spacers {G) should go between the sliding door track (6) and top crossbar (2) ! and attached with 4 (F) screws. > |a=s NIN DD STEP 17 Attach top crossbar (2) to inner panels (9 & 10) and outer panels (11 & 12).
STEP 18 Attach cam bolts (A) and dowels (B) to top panel (1). (Co STEP 19 Attach the top panel (1) to the rest of the assembled parts using cam locks (C).
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 20 @ Attach pivot hinges (J &K) to swinging doors (18 & 19). @ Pivot Hinge J goes with door 19, pivot hinge K goes with door 18. @ Attach long Washers(L) by screws(Z) to swinging doors below.
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 21 @ Attach the top of the swinging doors both sides of the assembled TV stand. @Put the washers (V) and the pivot hinges {J &K) to the bottom of the assembled TV stand and push the swinging doors connect with the pivot hinges {J &K).
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 23 @ Assemble the right sliding door (16) by attaching the sliding assembly (N/P) to both sides of the door. @ Attach the handle (1) to the front of the door by screwing in from the back. @ Attach the protective sticker (W) to the top left of and bottom left of the sliding door.
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 24 @ Assemble the left sliding door (17) by attaching the sliding assembly (N/P) to both sides of the door. @ Attach the handle to the front of the door by screwing in from the back.
SAVE THESE INSTRUCTIONS FOR FUTURE USE STEP 27 Insert shelf support brackets (Q) from rear, adjusting for the shelf height you desire. Q 20 These can be removed and readjusted later if needed. Put the stickers (R) to cover and hide the stews. X 38 STEP 28 Insert the removable shelves (3) & removable panel (20) onto the shelf support brackets (Q).
STEP 31 Attach the bolts (R) to the rear panels of the TV stand. STEP 32 Attach the anti-tilt nylon strips to the back of the TV stand.
SAVE THESE INSTRUCTIONS FOR FUTURE USE Iris best to keep your fumigators in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish. Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.
SAVE THESE INSTRUCTIONS FOR FUTURE USE ELA AT (Tgp ELT] TURBO provides a 1-year limited warranty for TURBO TV Stand, from the date of purchase, subject to the following conditions and limitations outlined below. WHAT IS COVERED? @This warranty is limited to the repair or replacement of part(s) proved to be defective in material or workmanship, after said defect Is confirmed by the manufacturer's Inspection.
