EN INSTRUCTION MANUAL Electric Oven TT-EV60 www.zline-world.
Thank you for buying TurboWave - Electric Oven by TurboTronic®. You will now be able to cook a wide assortment of delicacy food. TT-EV60 Electric Oven it’s like a Full-size oven performance on your countertop, perfect for Baking, Reheating and Grilling 60L and Wide temperature range of 100°C to 230°C. this compact toaster oven lets you toast golden brown bread slices or cook pizzas with a tender, crispy crust in less time. 220-240V~ 50Hz 2200W 60L IMPORTANT SAFEGUARDS HOUSEHOLD USE ONLY.
22. Always wear protective, insulated oven gloves when inserting or removing items from the hot oven. 23. This appliance has a tempered, safety glass door. The glass in stronger than ordinary glass and more resistant to breakage. Tempered glass can still break around edges. Avoid scratching door surface or nicking edges. 24. This appliance is OFF when the Timer Control button is in the “OFF” position. 25. Do not use outdoors. Do not immerse the oven into water. 26.
1. Switch for rotisserie and convection: OFF / convection / rotisserie / convection & rotisserie; 2. Power indicator light: it turns on when timer is on; 3. Oven thermostat: to adjust cooking temperature from 100ºC to 230 ºC; 4. Heating selection: OFF / upper heating / lower heating / upper & lower heating; 5. Timer: from OFF to 60 minutes. When timer is on, inner lamp work at the same time; 6. Rotisserie 7. Tray handle: used to take in and out of bake tray and wire rack; 8.
Turn the time control to your desired cooking time. Turn the function control to "Upper Heater". To check or remove roast, use the tray handle provided to help you slide the roast in and out. When broiling is complete, turn the heating selection to “off”. HOW TO TOAST Operation: Set the Temperature Control Knob to desired temperature. Turn the function control to "Upper & Lower Heaters work". Place food on the wire rack. Set the timer to your desired cooking time.
CARE & CLEANING Warning: Be sure to unplug the oven and cool it before cleaning. If desired, wipe the walls with a damp sponge, cloth or nylon scouring pad and mild detergent. DO NOT USE STEEL WOOL SCOURING PADS, ABRASIVE CLEANERS OR SCRAPE THE WALLS WITH A METAL UTENSIL, AS ALL OF THESE METHODS MAY DAMAGE THE CABINET. All accessories should be washed in hot soapy water or can be cleaned in a dishwasher. Then keep them dry. The door can be wiped with a damp sponge and wiped dry with a paper or cloth towel.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required maintenance (e.g., failure to keep the well of the motor base clear of food spills and other debris), or damage due to mishandling in transit. 4. Consequential and incidental damages. 5. Defects caused by repair persons not authorized by TurboTronic®.