Operation Manual

PARTS DESCRIPTION

1 Motor Unit

Accessory - Bowl Lid

Speeds Selector

Accessory - Kneading hook

3 Locking Bar

Accessory - Stirrer beater

Accessories Outlet

Accessory - Whisk

5 Mixing bowl

USING THE MIXING BOWL

1. Press down the Locking Bar to lift up the arm.

2. Place the mixing bowl into the housing and turn the bowl until it locks into place.

3. Inserting the Bowl Lid and then Kneading hook / Stirrer beater / Whisk into Accessories Outlet. Sure the

Accessory is inserted well.

4. Now fill in your ingredients through the Bowl Lid .

5. Press the Locking Bar down again and in the same time press down the arm to lock into body unit

6. Turn Speeds Selector to start the machine and set the right speed.

7. After operation, turn the Speeds Selector back to “0” position to stop machine. Then remove the mains

plug.

8. Press the Locking Bar down again to disassemble Kneading hook / Stirrer beater / Whisk , Bowl Lid, and

then remove mixing bowl

9. The mixture can now be released with the help of a spatula and removed from the mixing bowl.

10. Clean the parts as described under “Cleaning”

How to assemble / disassemble Accessory

Ⅰ) Bowl lid