Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX84 Array on a TLX84-FLB Flybar
- Chapter 4: Assembling TLX215L Subwoofers on a TLX84-FLB Flybar
- Chapter 5: Assembling a TLX84 Array with a TLX215L Subwoofer
- Chapter 6: Groundstack of two TLX215L Subwoofers
- Chapter 7: Groundstack TLX215L Subwoofer and TLX84 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure quantities and combinations for TLX84-FLB flybar suspension at 10:1, 7:1, 5:1 design factors
- Manufacturer’s Declaration
32 TLX84 and TLX215L Rigging Manual
Chapter 6: Groundstack of two TLX215L Subwoofers
6.0.1 Required Components
Item Quantity
TLX215L Subwoofer 3 (maximum)
6.0.2 Location
The TLX215L subwoofers should be located on a at, horizontal, and dry surface,
capable of supporting the weight of the complete assembly.
6.0.3 Measured Weights
Item Quantity Weight (kg) Weight (lbs)
TLX215L
1 65.0 143
2 130 287
3 195 430
The following procedure describes how to assemble a groundstack with two
TLX215L subwoofers.
The TLX215L subwoofers are attached using the 2 bottom mounting links and the
rear drop-down link of the top subwoofer.
WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 3 TLX215L SUBWOOFERS FOR THIS
GROUNDSTACK CONFIGURATION. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.
WARNING
WHERE POSSIBLE ALWAYS SECURE THE GROUNDSTACKED SPEAKERS TO THE
STACKING SURFACE WITH ADDITIONAL FIXINGS SUCH AS RATCHET STRAPS.
6.0.4 Personnel
The following procedures shall be undertaken by experienced, certied,
qualied, and authorised personnel only. The procedures require the use of three
or more authorised persons.
Protective Headwear shall be worn
Protective Footwear shall be worn
Protective Gloves shall be worn
Protective Eyewear shall be worn
Practice Safe Lifting