Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX84 Array on a TLX84-FLB Flybar
- Chapter 4: Assembling TLX215L Subwoofers on a TLX84-FLB Flybar
- Chapter 5: Assembling a TLX84 Array with a TLX215L Subwoofer
- Chapter 6: Groundstack of two TLX215L Subwoofers
- Chapter 7: Groundstack TLX215L Subwoofer and TLX84 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure quantities and combinations for TLX84-FLB flybar suspension at 10:1, 7:1, 5:1 design factors
- Manufacturer’s Declaration
TLX84 and TLX215L Rigging Manual 29
Procedure 5.1 - Attaching the TLX84-FLB ybar to the TLX215L Subwoofer
1. Perform the previous procedures in Chapter 4: Procedure 4.1 steps 1 to 5,
to attach the TLX84-FLB ybar to the TLX215L subwoofer.
Procedure Description of Work Check
4.1 step 1 to
step 5
Attaching the TLX215L Subwoofer to the
TLX84-FLB Flybar
Double check all pins are correctly inserted, and that the ybar
is securely attached to the subwoofer.
2. Attach a bow shackle or other lifting equipment securely to the ybar
mounting hole recommended by the EASE FOCUS II software, then attach
the hook and chain. Carefully raise the ybar/subwoofer assembly to a
reasonable working height to allow attachment of the rst TLX84 cabinet.
3. Prepare the subwoofer by pulling out the front rigging pins (1), to slide
down the drop down links (3). Secure the links in the lower position with
the pins (1). Remove the rear rigging pin (4) beneath the subwoofer,
and then the rear drop-down link (5) will drop down.
CAUTION
Do not lower the TLX215L subwoofer onto the ground with the mounting links (3)
and drop-down link (5) in the down position. This may cause damage to the links
and the drop-down link, or cause damage to the stage. They should be retracted
by reversing the order of the steps above.
2
1
3
5
4
3