Manual

28 TLX84 and TLX215L Rigging Manual
Chapter 5: Assembling a TLX84 Array with a TLX215L Subwoofer
5.0.1 Required Components
Item Quantity
TLX84-FLB Fly bar 1
TLX215L Subwoofer 1
TLX84 Cabinet 4
5.0.2 Measured Weights
Total Measured System Weight
Item Quantity
Total Weight, including one TLX84-FLB Flybar and
one TLX215L Subwoofer
TLX84 1 118 kg 260 lbs
2 146 kg 322 lbs
3 174 kg 383 lbs
4 202 kg 445 lbs
TLX84-FLB Flybar Working Load Limit (WLL)
ng Load (SWL)
Item WLL (kg) WLL (lbs)
TLX84-FLB 260 573
The following procedure describes how to assemble a mixed array consisting of
one TLX215L subwoofer and four TLX84 cabinets below it.
One TLX84-FLB ybar is attached to the top of the TLX215L subwoofer, using
components supplied with the TLX84-FLB ybar.
 WARNING
VARIOUS MIXTURES OF TLX84 CABINETS AND TLX215L SUBWOOFERS CAN
BE CONFIGURED BUT DO NOT EXCEED A TOTAL WEIGHT OF 260 KG. A TYPICAL
CONFIGURATION IS 1 SUBWOOFER AND 4 TLX84 (SHOWN)
 WARNING
THIS ARRAY SHALL ONLY BE MADE WITH THE TLX215L SUBWOOFER ON TOP,
AND THE TLX84 CABINETS BELOW. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.
5.0.3 Personnel
The following procedures shall be undertaken by experienced, certied,
qualied, and authorised personnel only. The procedures require the use of three
or more authorised persons.
Protective Headwear shall be worn
Protective Footwear shall be worn
Protective Gloves shall be worn
Protective Eyewear shall be worn
Practice Safe Lifting