Manual

26 TLX84 and TLX215L Rigging Manual
Procedure 4.1 Connecting TLX215L Subwoofers to the TLX84-FLB Flybar
1. Prepare the TLX84-FLB ybar by pulling out the rigging pins (2) to drop
down the front links (1) and then secure them in the down position with
the rigging pins (2). Lower the rear drop link from its storage position by
removing the rigging pin.
Double check that all pins are correctly inserted, before
proceeding further.
2. Pull out the subwoofer's front pins (7). Carefully lift the TLX84-FLB ybar on
top of the TLX215L subwoofer and align the ybar's front links (1) with the
top mounting slots (6) of the subwoofer. Insert the front pins (7) to secure
the front links (1) to the subwoofer.
Take care not to trap your ngers between components.
3. Align the ybar's drop-down link (4) with the hole (8) in the TLX215L rear
bracket. Insert the rigging pin (5) to secure the link to the subwoofer.
Double check that all pins are correctly inserted,
before proceeding further.
4. To attach a second subwoofer, rst attach a bow shackle or other lifting
equipment securely to the ybar mounting hole recommended by the EASE
FOCUS II software, then attach the hook and chain. Carefully raise the ybar/
subwoofer assembly to a reasonable working height to allow attachment of
the next subwoofer.
5. Move the bottom TLX215L subwoofer to a position directly below the top
subwoofer. Make sure it is resting on a at steady surface.
4
5
2
1
1
2
3
1
7
6
4
5
8