Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX84 Array on a TLX84-FLB Flybar
- Chapter 4: Assembling TLX215L Subwoofers on a TLX84-FLB Flybar
- Chapter 5: Assembling a TLX84 Array with a TLX215L Subwoofer
- Chapter 6: Groundstack of two TLX215L Subwoofers
- Chapter 7: Groundstack TLX215L Subwoofer and TLX84 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure quantities and combinations for TLX84-FLB flybar suspension at 10:1, 7:1, 5:1 design factors
- Manufacturer’s Declaration
TLX84 and TLX215L Rigging Manual 25
Chapter 4: Assembling TLX215L Subwoofers on a TLX84-FLB Flybar
4.0.1 Required Components
Item Quantity
TLX84-FLB Flybar 1
TLX215L Subwoofer 3 (max)
4.0.2 Location
Move the TLX215L subwoofer so it is sitting upright on a safe at surface, directly
below the suspension point.
4.0.3 Measured Weights
Total Measured System Weight
Item Quantity Total Weight Including one TLX84-FLB Flybar
TLX215L 1 90 kg 199 lbs
2 155 kg 342 lbs
3 220 kg 485 lbs
TLX84-FLB Flybar Working Load Limit (WLL)
Item Working Load Limit (WLL)
TLX84-FLB TLX84-FLB 260 kg 573 lbs
The following procedure describes how to assemble a TLX215L subwoofer to the
TLX84-FLB ybar.
The TLX84-FLB ybar is attached to the top of the TLX215L subwoofer,
using 2 front pins, 2 mounting links, and the rear drop-down link from the
TLX84-FLB ybar.
WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 3 TLX215L SUBWOOFERS FOR ONE TLX84-
FLB FLYBAR. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PERMANENT INJURY
OR DEATH.
4.0.4 Personnel
The following procedures shall be undertaken by experienced, certied,
qualied, and authorised personnel only. The procedures require the use of three
or more authorised persons.
Protective Headwear shall be worn
Protective Footwear shall be worn
Protective Gloves shall be worn
Protective Eyewear shall be worn
Practice Safe Lifting