Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX84 Array on a TLX84-FLB Flybar
- Chapter 4: Assembling TLX215L Subwoofers on a TLX84-FLB Flybar
- Chapter 5: Assembling a TLX84 Array with a TLX215L Subwoofer
- Chapter 6: Groundstack of two TLX215L Subwoofers
- Chapter 7: Groundstack TLX215L Subwoofer and TLX84 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure quantities and combinations for TLX84-FLB flybar suspension at 10:1, 7:1, 5:1 design factors
- Manufacturer’s Declaration
20 TLX84 and TLX215L Rigging Manual
2.14.1 TLX84-FLB Flybar (continued)
Suspend the array by attaching one or more bow shackles or similar lifting
devices with a pin diameter (D) to t the 20 mm suspension pick point.
Typically, manufacturers of bow shackles provide suitable devices with pin
diameters between 11 mm and 19 mm, and with work loads between 1 tonnes
and 3.25 tonnes.
Installation and setup should only be carried out by qualied and authorized
personnel observing the valid national Rules for the Prevention of Accidents
(RPA). Refer to Chapter 1 for more details.
Typical Bow Shackle