Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX84 Array on a TLX84-FLB Flybar
- Chapter 4: Assembling TLX215L Subwoofers on a TLX84-FLB Flybar
- Chapter 5: Assembling a TLX84 Array with a TLX215L Subwoofer
- Chapter 6: Groundstack of two TLX215L Subwoofers
- Chapter 7: Groundstack TLX215L Subwoofer and TLX84 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure quantities and combinations for TLX84-FLB flybar suspension at 10:1, 7:1, 5:1 design factors
- Manufacturer’s Declaration
TLX84 and TLX215L Rigging Manual 19
2.14 TLX84-FLB Flybar Mounting Components
The TLX84-FLB ybar shall only be used with TLX84 cabinets and TLX215L
subwoofers.
1. Mounting Links – These retractable links connect the ybar to the top
mounting slots of the TLX84 cabinet or TLX215L subwoofer. The connections
are secured using the front pins of the TLX84 cabinet or TLX215L subwoofer.
2. Rigging Pins – These are used to secure the mounting links (1) in the up or
down positions.
3. Suspension Points – Ten 20 mm diameter holes are used to attach a
bow shackle or similar lifting equipment for suspending the assembly.
Use the EASE FOCUS II software to determine the correct pick point
for each conguration.
4. Drop-Down Links – For attaching the ybar to the rear mounting point
of TLX84 or TLX215L. The rear drop link is for attaching to TLX215L and the
center drop link is for TLX84.
5. Lugs – These 2 lugs are used to secure secondary safeties to the ybar.
4 - Center drop link for TLX84
Links stowed
3
4 - Rear drop link for TLX215L
2 1
5