Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX84 Array on a TLX84-FLB Flybar
- Chapter 4: Assembling TLX215L Subwoofers on a TLX84-FLB Flybar
- Chapter 5: Assembling a TLX84 Array with a TLX215L Subwoofer
- Chapter 6: Groundstack of two TLX215L Subwoofers
- Chapter 7: Groundstack TLX215L Subwoofer and TLX84 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure quantities and combinations for TLX84-FLB flybar suspension at 10:1, 7:1, 5:1 design factors
- Manufacturer’s Declaration
TLX84 and TLX215L Rigging Manual 17
2.12 TLX215L Subwoofer
Mounting Components
Mounting Links Out
The TLX215L subwoofer has 2 retractable mounting links at the bottom (5),
mounting holes at the rear (9) and top (8), and a drop-down link (7) at the rear
bottom and underneath (10). The TLX84-FLB ybar has 2 drop down links that t
in two locations (1) on top of the subwoofer.
1. Location for Top Mounting Links – TLX84-FLB ybar has two drop down
links that t in these two locations. The bottom links (5) of another TLX215L
subwoofer or TLX84 cabinet (for ground stacking) can also t here.
2. Top Pins – Secures the mounting links of the TLX84-FLB ybar or the drop
down links of a second TLX215L subwoofer or TLX84 cabinet.
3. Bottom Bolts – These allow the bottom mounting links (5) to be
positioned up or down, by sliding in the slot, then securing with
the bottom pin (4).
4. Bottom Pins – Secures the bottom mounting links (5) in the up or
down position.
5. Bottom Mounting Links – These retractable links connect to the top of a
second TLX215L subwoofer or TLX84 cabinet below.
6. Rear Pin – This is used to connect the drop down link (7) to a subwoofer
below, or to stow the drop-down link if it is not used.
7. Rear Drop-Down Link – This is used to connect to the rear mounting hole
(9) of a second TLX215L subwoofer.
8. Top Mounting Hole – This is used to connect to the drop-down link (8) of a
TLX84 cabinet mounted on top of the subwoofer.
9. Rear Mounting Hole – This is used to connect to the drop-down
link (7) of a TLX215L subwoofer above it, or to the drop-down link of a
TLX84-FLB ybar.
10. Bottom Drop-Down Link – This is used to connect to the rear mounting
hole of a TLX84 cabinet hung below the subwoofer.
11. Bottom Pin – This rigging pin is used to stow the drop-down link (10) if it
is not used.
10
11
8
9
2
1
5
7
6
3
4