Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX84 Array on a TLX84-FLB Flybar
- Chapter 4: Assembling TLX215L Subwoofers on a TLX84-FLB Flybar
- Chapter 5: Assembling a TLX84 Array with a TLX215L Subwoofer
- Chapter 6: Groundstack of two TLX215L Subwoofers
- Chapter 7: Groundstack TLX215L Subwoofer and TLX84 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure quantities and combinations for TLX84-FLB flybar suspension at 10:1, 7:1, 5:1 design factors
- Manufacturer’s Declaration
16 TLX84 and TLX215L Rigging Manual
2.11 Vertical Orientation
CORRECT INSTALLATION
INCORRECT INSTALLATION
Vertical Orientation Only!
The mechanical design of the TLX84 cabinet, TLX215L subwoofer, and the
TLX84-FLB ybar uses links and pins to assemble the various components. The
mechanical strength comes from the cabinet's metal side pieces and the pins,
and not through the wooden cabinets. The cabinets are supported vertically
below each other, and vertically below the ybar.
WARNING
THE ASSEMBLY MUST BE ORIENTED SO THAT THE SIDES OF THE CABINETS AND
SUBWOOFER ARE ALWAYS KEPT IN THE VERTICAL PLANE. FAILURE TO DO THIS
MAY CAUSE STRAIN AND FAILURE OF THE MECHANICAL STRUCTURE, LEADING TO
POSSIBLE PERMANENT INJURY OR DEATH.
WARNING
THIS ILLUSTRATION SHOWS AN INCORRECT INSTALLATION, WHERE THE SIDES OF
THE CABINETS ARE NOT IN THE VERTICAL PLANE. THIS MAY CAUSE STRAIN AND
FAILURE OF THE MECHANICAL STRUCTURE, LEADING TO POSSIBLE PERMANENT
INJURY OR DEATH.
WARNING
THE TLX84 CABINETS, TLX215L SUBWOOFERS, AND TLX84-FLB FLYBAR SHALL NOT
BE CLIMBED UPON. THIS MAY CAUSE STRAIN AND FAILURE OF THE MECHANICAL
STRUCTURE, LEADING TO POSSIBLE PERMANENT INJURY OR DEATH.