Product Information Document
4 of 7
Product Information Document
Fly Bar for TLX43 and TLX212L for
Suspended or Ground Stacked Arrays
LIVERPOOL
TLX43-FLB
Accessories
An array of 8 TLX43 cabinets
attached to a TLX43-FLB ybar
TLX43-FLB ybar oriented to attach to a TLX43 cabinet.
TLX43-FLB ybar oriented to attach to a TLX212L subwoofer
A mixed array with a TLX212L
subwoofer, 4 TLX43 cabinets and
2 TLX43-FLB ybars
A mixed array ground stack with
a TLX212L subwoofer, 4 TLX43
cabinets and a TLX43-FLB ybar
Pick Points
Link
Lug
Lug
Lug
Link
Link
Lug
Pin
Link
Pin
Mounting and Rigging
Safety Warning: Only authorised and certied personnel shall design and install suspended or ground stack congurations, following the
instructions and procedures in the TLX43-FLB rigging manual supplied with the TLX43-FLB ybar, or downloaded from turbosound.com.
Failure to follow these instructions may lead to death or permanent injury. For maximum array sizes, weights and working load limits, please
consult the TLX43-FLB rigging manual.
One side of the TLX43-FLB ybar is used to suspend TLX43 cabinets. It has 2 xed mounting lugs and a drop down link that connect to
corresponding lugs and rear mounting hole on the TLX43 cabinet. The main arm of the ybar has ve 20 mm diameter pick points.
The TLX43-FLB ybar is inverted to connect to the TLX212L subwoofer. It has 2 xed mounting lugs and a drop down link that connect to
corresponding lugs and rear mounting hole on the TLX212L subwoofer. The ybar can connect to the top or bottom of a TLX212L subwoofer,
using the supplied hardware shown. The hardware should be removed and kept in a safe place if a TLX212L subwoofer is not used.