Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
44 TLX43 and TLX212L Rigging Manual
Procedure 7.2 continued
10. Insert the front two pins (3) to secure the front two mounting lugs to the
two mounting lugs of the TLX43 cabinet below it. Support the rear of the
cabinet until the rear link is connected in the next step.
Take care not to trap your ngers between components.
11. Align the rear link (7) of the bottom TLX43 cabinet with the desired
mounting hole (5) in the rear of the TLX43 cabinet above it.
12. Insert the pin (6) to secure the rear link (7) of the bottom cabinet to rear of
the cabinet above it.
7
5
6
Double check all pins are correctly inserted, before
proceeding further.
3
3