Manual

40 TLX43 and TLX212L Rigging Manual
Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
7.0.1 Required Components
Item Quantity
TLX43-FLB Flybar 1
TLX212L Subwoofer 2 (maximum)
TLX43 Cabinet 4 (maximum)
7.0.2 Location
The TLX212L subwoofer should be located on a at, horizontal, and dry surface,
capable of supporting the weight of the complete assembly.
7.0.3 Measured Weights
Total Measured System Weight
Item Quantity
Total Weight including one TLX43-FLB
Flybar and one TLX212L Subwoofer
TLX43 1 57.8 kg 127 lbs
2 65.8 kg 145 lbs
3 73.8 kg 163 lbs
4 81.8 kg 180 lbs
The following procedure describes how to assemble a groundstack with a
TLX212L subwoofer as a base and an array of four TLX43 cabinets on top.
The TLX43-FLB ybar is attached to the top of the TLX212L subwoofer, using 2
front pins and a rear drop-down link supplied with the TLX43-FLB ybar.
The array of up to 4 TLX43 cabinets is built on top of the TLX43-FLB ybar.
 WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 4 TLX43 CABINETS FOR THIS GROUNDSTACK
CONFIGURATION. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PERMANENT
INJURY OR DEATH.
 WARNING
WHERE POSSIBLE ALWAYS SECURE THE GROUNDSTACKED SPEAKERS TO THE
STACKING SURFACE WITH ADDITIONAL FIXINGS SUCH AS RATCHET STRAPS.
7.0.4 Personnel
The following procedures shall be undertaken by experienced, certied,
qualied, and authorised personnel only. The procedures require the use of three
or more authorised persons.
Protective Headwear shall be worn
Protective Footwear shall be worn
Protective Gloves shall be worn
Protective Eyewear shall be worn
Practice Safe Lifting