Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
38 TLX43 and TLX212L Rigging Manual
Chapter 6: Groundstack of two TLX212L Subwoofers
6.0.1 Required Components
Item Quantity
TLX212L Subwoofer 3 (maximum)
6.0.2 Location
The TLX212L subwoofers should be located on a at, horizontal, and dry surface,
capable of supporting the weight of the complete assembly.
6.0.3 Measured Weights
The following procedure describes how to assemble a groundstack with two
TLX212L subwoofers.
The TLX212L subwoofers are attached using the 2 bottom mounting links and the
rear drop-down link of the top subwoofer.
WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 3 TLX212L SUBWOOFERS FOR THIS
GROUNDSTACK CONFIGURATION. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.
WARNING
WHERE POSSIBLE ALWAYS SECURE THE GROUNDSTACKED SPEAKERS TO THE
STACKING SURFACE WITH ADDITIONAL FIXINGS SUCH AS RATCHET STRAPS.
6.0.4 Personnel
The following procedures shall be undertaken by experienced, certied,
qualied, and authorised personnel only. The procedures require the use of three
or more authorised persons.
Item Quantity Weight (kg) Weight (lbs)
TLX212L
1 43 94.8
2 86 190
3 129 284
Protective Headwear shall be worn
Protective Footwear shall be worn
Protective Gloves shall be worn
Protective Eyewear shall be worn
Practice Safe Lifting