Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
TLX43 and TLX212L Rigging Manual 37
Procedure 5.3 - Attaching the TLX43 Cabinets to the TLX43-FLB Flybar
1. Perform the previous procedures shown in Chapter 3 to attach a
maximum of four TLX43 cabinets to the bottom TLX43-FLB ybar.
Follow all safety precautions in the procedure.
Procedure Description of Work Check
3.1
Connecting TLX43 cabinets to the
TLX43-FLB ybar
Alternatively, a previously-assembled group of four TLX43 cabinets can be
assembled to the bottom TLX43-FLB ybar.
WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 1 TLX212L SUBWOOFER AND 4 TLX43
CABINETS FOR THIS CONFIGURATION. FAILURE TO FOLLOW INSTRUCTIONS MAY
CAUSE PERMANENT INJURY OR DEATH.
WARNING
THIS ARRAY SHALL ONLY BE MADE WITH THE TLX212L SUBWOOFER ON TOP,
AND THE TLX43 CABINETS BELOW. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.
NOTE
Disassembly is the reverse of assembly.