Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
36 TLX43 and TLX212L Rigging Manual
4. Support the rear of the ybar and align the rear hole (5) of the ybar with
the lower hole in the rear drop-down link (4) of the subwoofer.
5. Insert the rear pin (6) to secure the drop-down link to the ybar.
Double check that all pins are correctly inserted, and that the
lower ybar is now securely attached to the subwoofer.
NOTE
Disassembly is the reverse of assembly.
4
5
6