Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
32 TLX43 and TLX212L Rigging Manual
7. Check that left and right front rigging pins (4) are correctly inserted - 4x
rigging pins total. Check that the rear drop down link rigging pin (5) is
correctly inserted.
Double check all the connections to make sure that the
TLX212L subwoofers and the TLX43-FLB ybar are securely
connected together.
NOTE
Disassembly is the reverse of assembly.
WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 2 TLX212L SUBWOOFERS FOR ONE
TLX43-FLB FLYBAR. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE PERMANENT
INJURY OR DEATH
CAUTION
Do not lower the TLX212L subwoofer onto the ground with the mounting links
and drop-down link in the down position. This may cause damage to the links
and the drop-down link, or cause damage to the stage. They should be retracted
by reversing the order of the steps above.
NOTE
Disassembly is the reverse of assembly.
4
5