Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
TLX43 and TLX212L Rigging Manual 29
Procedure 4.2 - Preparing the TLX43-FLB Flybar for a TLX212L Subwoofer
Procedure 4.3 - Attaching the TLX43-FLB Flybar to the TLX212L Subwoofer
The TLX43-FLB ybar is supplied with captive front pins and a removable rear
sub drop link and rigging pin assembly that is only used when suspending the
TLX212L subwoofer.
1. Remove the two front pins (4) from the front mounting lugs (5).
2. Remove the lowest pin (6) from the rear drop-down link (7) as shown.
1. Position the ybar over the top of the TLX212L subwoofer as shown.
2. Carefully lower the ybar on top of the subwoofer and align the ybar’s
front mounting lugs (5) with the subwoofer's mounting links (1).
3. Insert the two front pins (4) to secure the ybar to the mounting links (1) of
the TLX212L subwoofer.
4