Manual

TLX43 and TLX212L Rigging Manual 27
Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
4.0.1 Required Components
Item Quantity
TLX43-FLB Flybar 1
TLX212L Subwoofer 2 (max)
4.0.2 Location
Move the TLX212L subwoofer so it is sitting upright on a safe at surface, directly
below the suspension point.
4.0.3 Measured Weights
Total Measured System Weight
Item Quantity Total Weight Including one TLX43-FLB Flybar
TLX212L 1 49.8 kg 110 lbs
2 92.8 kg 205 lbs
TLX43-FLB Flybar Working Load Limit (WLL)
Item Working Load Limit (WLL)
TLX43-FLB 94 kg 207.23 lbs
The following procedure describes how to assemble a single TLX212L subwoofer
to the TLX43-FLB ybar.
The TLX43-FLB ybar is attached to the top of the TLX212L subwoofer, using 2
front pins, 2 mounting links, and a rear drop-down link, supplied with
the TLX43-FLB ybar.
 WARNING
DO NOT EXCEED A TOTAL QUANTITY OF 2 TLX212L SUBWOOFERS FOR
ONE TLX43-FLB FLYBAR. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH
4.0.4 Personnel
The following procedures shall be undertaken by experienced, certied,
qualied, and authorised personnel only. The procedures require the use of three
or more authorised persons.
Protective Headwear shall be worn
Protective Footwear shall be worn
Protective Gloves shall be worn
Protective Eyewear shall be worn
Practice Safe Lifting