Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
16 TLX43 and TLX212L Rigging Manual
2.11 Vertical Orientation
CORRECT INSTALLATION
INCORRECT INSTALLATION
Vertical Orientation Only!
The mechanical design of the TLX43 cabinet, TLX212L subwoofer, and the
TLX43-FLB ybar uses lugs, links, and pins to assemble the various components.
The mechanical strength comes from the cabinet's metal side pieces and the
pins, and not through the wooden cabinets. The cabinets are supported vertically
below each other, and vertically below the ybar.
WARNING
THE ASSEMBLY MUST BE ORIENTED SO THAT THE SIDES OF THE CABINETS AND
SUBWOOFER ARE ALWAYS KEPT IN THE VERTICAL PLANE. FAILURE TO DO THIS
MAY CAUSE STRAIN AND FAILURE OF THE MECHANICAL STRUCTURE, LEADING TO
POSSIBLE PERMANENT INJURY OR DEATH.
WARNING
THIS ILLUSTRATION SHOWS AN INCORRECT INSTALLATION, WHERE THE SIDES OF
THE CABINETS ARE NOT IN THE VERTICAL PLANE. THIS MAY CAUSE STRAIN AND
FAILURE OF THE MECHANICAL STRUCTURE, LEADING TO POSSIBLE PERMANENT
INJURY OR DEATH.
WARNING
THE TLX43 CABINETS, TLX212L SUBWOOFERS, AND TLX43-FLB FLYBAR SHALL NOT
BE CLIMBED UPON. THIS MAY CAUSE STRAIN AND FAILURE OF THE MECHANICAL
STRUCTURE, LEADING TO POSSIBLE PERMANENT INJURY OR DEATH.