Quick Start Guide

14 TLX LIVERPOOL SERIES Quick Start Guide 15
Connections
Mode Back Panel Connector Internal Schematic
TLX43
BI-AMP, Input Low +
BI-AMP, Input Low -
BI-AMP, Input High +
BI-AMP, Input High -
1-
2-
2+
1+
Amplier Channel 1
Amplier Channel 2
LF 2
HF
NL4
Input/
Link
1+
+
-
+
-
+
-
1-
2+
2-
>
>
>
>
>
>
>
>
1+
1-
2+
2-
NL4
Input/
Link
LF 1
TLX212L
1-
2-
2+
1+
Input SUB -
Input SUB +
LF 1
NL4
Input/
Link
1+
1-
2+
2 -
+
-
+
-
>
>
>
>
>
>
>
>
1+
1-
2+
2 -
NL4
Input/
Link
LF 2
TLX84
BI-AMP, Input Low +
BI-AMP, Input Low -
BI-AMP, Input High +
BI-AMP, Input High -
1-
2-
2+
1+
Amplier Channel 1
Amplier Channel 2
HF 1
HF 2
NL4
Input/
Link
1+
1-
2+
2 -
+
-
+
-
+
-
+
-
>
>
>
>
>
>
>
>
1+
1-
2+
2 -
NL4
Input/
Link
LF 1
LF 2
TLX215L
1-
2-
2+
1+
Input SUB -
Input SUB +
LF 1
NL4
Input/
Link
1+
1-
2+
2 -
+
-
+
-
>
>
>
>
>
>
>
>
1+
1-
2+
2 -
NL4
Input/
Link
LF 2
Lab Gruppen PLM + Series
Amplier outputs congured
in Lake software for TLX215L
on pins 1 +/- and 2 +/-
TLX 215L Example wiring guide
DASHED
NL4 - NL4 two-conductor “SUB LINK”
cable cross wired from 2+ to 1+ and 2 - to 1-
SOLID
NL4 - NL4 four-conductor cable with standard wiring (1+/- to 1+/- and 2+/- to 2+/-)
NOTE: To use all 4 channels of a Lab Gruppen PLM+ Series Amplier to drive 4 x TLX215L total, repeat for
channel 3,4 outputs and ensure correct output routing in Lake software.
THIS NL4 USES
PINS 1+ / 1-
THIS NL4 USES
PINS 2+ / 2-
Rigging and Acoustic Simulation Software
Refer to TLX Liverpool Series Rigging Manuals for safe suspension and installation of the loudspeakers, ybars and all suspension hardware.
TLX Series loudspeakers and ybars are designed and tested to strict BGV-C1 standards. Suspension of these speakers must be performed in accordance with
the rigging manual supplied with the respective ybars and available online at turbosound.com.