Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
TLX43 and TLX212L Rigging Manual 35
Procedure 5.2 - Attaching the bottom TLX43-FLB Flybar to the TLX212L Subwoofer
1. Remove the two front pins (1) and the rear drop link and pins (2) from the
second (bottom) ybar. (The rear drop link and pins are not used, but the
two front pins are.)
2. Line up the ybar with the bottom of the TLX212L subwoofer as shown.
3. Align the ybar with the bottom front links (3) of the subwoofer, and insert
the two front pins (1) to secure the ybar to the subwoofer.
1
1
2
3
1
1
1
1