Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
30 TLX43 and TLX212L Rigging Manual
Procedure 4.3 continued
4. Line up the hole in the rear drop-down link (7) of the ybar, with the hole in
the rear mounting bracket of the subwoofer. Insert the rear pin (6) to capture
the drop-down link.
Double check all pins are correctly inserted, and that the
ybar is now securely attached to the subwoofer at all points.
NOTE
Disassembly is the reverse of assembly.