Manual
Table Of Contents
- Important Safety Instructions
- Legal Disclaimer
- Limited warranty
- Chapter 1: Safety Information
- Chapter 2: Introduction
- Chapter 3: Assembling a TLX43 Array on a TLX43-FLB Flybar
- Chapter 4: Assembling one TLX212L Subwoofer on a TLX43-FLB Flybar
- Chapter 5: Assembling a TLX43 Array with a TLX212L Subwoofer
- Chapter 6: Groundstack of two TLX212L Subwoofers
- Chapter 7: Groundstack TLX212L Subwoofer and TLX43 Array
- Chapter 8: Safety Inspection
- Chapter 9: Enclosure Quantities and Combinations for TLX43-FLB Flybar Suspension at 10:1, 7:1, 5:1 Design Factors
- Manufacturer’s Declaration
TLX43 and TLX212L Rigging Manual 13
2.10 Rigging Pins
See Chapter 8 for information regarding inspection, care, and maintenance.
These pins are the fundamental mechanical fastener for the assembly of the
TLX43-FLB ybar, TLX43 cabinet, and the TLX212L subwoofer.
1. Spring Balls – These are locking devices that prevent the pin from pulling
out once it has been inserted.
2. Spring Release – Press this button in and the spring balls (1) will
unlock and allow the pin to be inserted into the mounting holes and lugs.
Release this button and the spring balls will lock and prevent the pin from
pulling back out.
3. Lanyard – These prevent the pins from being easily lost.
WARNING
BEFORE EVERY USE, INSPECT ALL PINS FOR DAMAGE, AND VERIFY THE CORRECT
OPERATION OF THE SPRING LOCKING MECHANISM. DO NOT USE ANY PINS THAT
SHOW SIGNS OF DAMAGE. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.
WARNING
BEFORE EVERY USE, MAKE SURE THAT ALL PINS ARE CLEAN AND FREE FROM
DIRT AND DEBRIS THAT MAY INTERFERE WITH THE CORRECT OPERATION OF THE
SPRING LOCKING MECHANISM. FAILURE TO FOLLOW INSTRUCTIONS MAY CAUSE
PERMANENT INJURY OR DEATH.
1
1
2
3