Manual
Table Of Contents
- 1. Important Safety Instructions (Amplifiers)
- 2. Welcome
- 3. The Flashline System
- 4. Connecting the Loudspeakers
- 5. System Configurations
- 6. AMPLIFIER RACK ROUTING
- 7. Rigging the Flashline system
- 8. The 20000DP AMPLIFIER
- 9. Amplifier Installation
- 10. Product Overview
- 11. Signal Flow and Lake Processing
- 12. Lake Controller Software
- 13. Warranty and Support
- 14. Maintenance
- 15. Technical Specifications
user manual
Flashline
Flashline User Manual
page 25
• Fit the top rear pins on both sides of the cabinet into the hole marked LOCK/GRID.
STORE
0
O
0.5
O
1
O
1.5
O
2
O
2.5
O
3
O
4
O
5
O
GRID
LOCK
LOCK/STORE
LOCK/ GRID
LOCK / GRID
• If the inter-cabinet angles have not already been set during warehouse preparation do this now. Set the angles
between cabinets with the front top pin on each cabinet by lifting the drop link of the cabinet above and inserting
the pin into one of the marked holes, reading the required angle settings from your EASE Focus2 prediction.
Ensure the pin is engaged in one of the four drop link holes and not in the central slot.
STORE
0
O
0.5
O
1
O
1.5
O
2
O
2.5
O
3
O
4
O
5
O
GRID
LOCK
LOCK/STORE
LOCK/GRID
STORE
0
O
0.5
O
1
O
1.5
O
2
O
2.5
O
3
O
4
O
5
O
GRID
LOCK
LOCK/STORE
LOCK/GRID
STORE
0
O
0.5
O
1
O
1.5
O
2
O
2.5
O
3
O
4
O
5
O
GRID
LOCK
LOCK/STORE
LOCK/GRID
STORE
0
O
0.5
O
1
O
1.5
O
2
O
2.5
O
3
O
4
O
5
O
GRID
LOCK
LOCK/STORE
LOCK/GRID
STORE
0
O
0.5
O
1
O
1.5
O
2
O
2.5
O
3
O
4
O
5
O
GRID