Manual
Table Of Contents
- 1. Important Safety Instructions (Amplifiers)
- 2. Welcome
- 3. The Flashline System
- 4. Connecting the Loudspeakers
- 5. System Configurations
- 6. AMPLIFIER RACK ROUTING
- 7. Rigging the Flashline system
- 8. The 20000DP AMPLIFIER
- 9. Amplifier Installation
- 10. Product Overview
- 11. Signal Flow and Lake Processing
- 12. Lake Controller Software
- 13. Warranty and Support
- 14. Maintenance
- 15. Technical Specifications
user manual
Flashline
Flashline User Manual
page 23
• Lift the TFS-TIP tipper bar out from its stowed location in the fly trunk and slide it into position through the
central section of the TFS-GRID with the lifting eyes uppermost. The front of the TFS-GRID flybar is indicated by
the small cut-outs in the corners.
1 2 3
FRONT
CLUSTER POINTS UP CLUSTER LEVEL CLUSTER POINTS DOWN
FRONT FRONT
• Attach 3.75 tonne shackles to each end of the TFS-TIP tipper bar at the lifting points.
• Use a 1 metre steel lifting rope between the motor and the front pickup point to raise the front motor bag so
that it does not hang in front of the top cabinet.
• If using the RECLINE remote laser inclinometer system attach the sensor unit now to the front of the TFS-GRID.
• Lift the TFS-GRID flybar to above head height.