Manual
Table Of Contents
- 1. Important Safety Instructions (Amplifiers)
- 2. Welcome
- 3. The Flashline System
- 4. Connecting the Loudspeakers
- 5. System Configurations
- 6. AMPLIFIER RACK ROUTING
- 7. Rigging the Flashline system
- 8. The 20000DP AMPLIFIER
- 9. Amplifier Installation
- 10. Product Overview
- 11. Signal Flow and Lake Processing
- 12. Lake Controller Software
- 13. Warranty and Support
- 14. Maintenance
- 15. Technical Specifications
user manual
Flashline
Flashline User Manual
page 21
7. Rigging the Flashline system
7.1 Overview
The rigging system consists of the following main components:
• TFS-GRID – a rectangular box section flying frame that supports a column of up to 20 cabinets
• TFS-TIP – a central bar which provides front and rear pick up points
• TFS-FT900 – the fly trunk houses two TFS-GRID flybars and associated parts such as shackles and locking bolts. It
is designed so as to allow the flybar to be connected and lifted out of the case with minimal manual handling
• Flex Array cabinets can be flown underneath as downfills using the CF-900 conversion frame
• RECLINE laser pointer allows remote monitoring of the vertical inclination of the array
7.2 TFS-FT900 Fly Trunk
TFS-FT900 Fly trunk lid
TFS-FT900 Fly trunk lid
TFS-TIP tipper bar
TFS-GRID
TFS-FT900 Fly trunk