Manual
Table Of Contents
- 1. Important Safety Instructions (Amplifiers)
- 2. Welcome
- 3. The Flashline System
- 4. Connecting the Loudspeakers
- 5. System Configurations
- 6. AMPLIFIER RACK ROUTING
- 7. Rigging the Flashline system
- 8. The 20000DP AMPLIFIER
- 9. Amplifier Installation
- 10. Product Overview
- 11. Signal Flow and Lake Processing
- 12. Lake Controller Software
- 13. Warranty and Support
- 14. Maintenance
- 15. Technical Specifications
user manual
Flashline
Flashline User Manual
page 15
5. System Configurations
5.1 Suggested amplifier loading for the TFS-900H
Each amplifier powers three enclosures. Whilst in theory the amplifier can power four enclosures this presents the
bass and low-mid with a 2 ohm load, which does not offer optimum performance.
BASS loading 2.6 ohms
LOW loading 2.6 ohms
MID loading 4 ohms
HIGH loading 6 ohms
Each amplifier is connected to one of the three
phases on the power supply. For optimum loading on
large systems it is good practice to load all phases
equally.